How Long Are Kitchen Cabinets Taking to Come in?

There are a number of factors that can affect the time needed to complete a kitchen project. One of these factors is the type of cabinets you order. If you order standard-sized cabinets, the installation process will be quicker than if you order custom-sized ones. Custom-sized cabinets require measurements that are specific to the space.
Refinishing or resurfacing cabinets

If you’re tired of the look of your kitchen cabinets but don’t want to replace them, you can refinish them. This process involves sanding down the cabinets to their bare wood and applying a new finish. Afterwards, you can paint or stain the cabinets to update their look. Refinishing also allows you to cover up minor imperfections and wear.

Refinishing or resurfacing kitchen cabinets requires some prep time, but it doesn’t take as long as replacing them. In addition, it requires fewer tools and materials than replacement. Refinishing or resurfacing kitchen cabinets also saves money, as you don’t have to buy new wood, hardware, or labor. And the process gives you a whole new look.
Stock or custom cabinets

Custom cabinets are the ultimate in style and design, but they also require time to come in. Once they are designed, manufactured and ordered, a custom set can take up to nine weeks to arrive. In the meantime, stock cabinets can be installed in your kitchen, but they are limited in design and may not be the best option for a unique kitchen layout.

Stock kitchen cabinets may seem like the faster option, but they’re not fully customizable. They may not have the features you want, but they’re guaranteed to fit in the space. And they’re usually cheaper. If you’re on a tight budget or don’t want to wait so long to get your cabinets, stock cabinets are the best option.
Roughing in for a fridge waterline

Before installing a refrigerator, you need to know how to rough in for its waterline. The water supply line for a refrigerator usually runs from a faucet in the kitchen to the refrigerator. This can be run through the cabinets or through the floor. It is best to leave a minimum of six to eight feet of slack in the waterline path so that you can move the fridge around and clean under it when necessary. You can use braided steel or copper line to run the waterline. Alternatively, you can use plastic tubing, which is often included in refrigerator installation kits.

Once you have decided on the location, the next step is to install the waterline. To do this, first you need to figure out the distance between the refrigerator and the kitchen cabinets. To do this, you can measure the distance from the front to back and measure the air gap from the back wall. If there is not enough space, you can use moving equipment to move the refrigerator into place.
Finish construction

Once you’ve finalized your cabinet design, you can begin the construction process. This phase of kitchen remodeling involves making plans, preparing contracts, and finalizing timelines. You should also create a scope of work so that you know who is responsible for which tasks. This will help you avoid delays. You may need to wait several months for the products you ordered, so if you can’t start construction until the demolition is complete, you might want to eat out more frequently until the materials arrive.

Finish construction is important not only for aesthetics but also for protecting wood surfaces from moisture, stains, and other factors. There are thousands of finishes available, each with different benefits.
Roughing in for a Reverse Osmosis unit

If you are ready to install a reverse osmosis system in your home, you must first decide where to place it. Many units are installed under the kitchen sink, but you can also install them in other areas, such as the garage, utility room, or laundry room. If you install them in the kitchen, you need to rough in a space under the sink that is close to the cold water line.

There are two types of reverse osmosis systems: whole-house systems and point-of-use systems. A whole-house system treats water before it enters your home, saving you hundreds of dollars per year. A point-of-use system, on the other hand, only treats water coming from one faucet and is less expensive than a whole-house system.